Jumpers And Dip Switch Settings; Rtc Clear Select; At/Atx Selection - Nexcom eLITE610 User Manual

Chapter 2: Jumpers and Connectors

Jumpers and DIP Switch Settings

RTC Clear Select

Connector type: 1x3 3-pin header, 2.54mm pitch
Connector location: JP5
1 3
Pin Settings
1-2 On Normal
2-3 On Clear BIOS
1-2 On: default
Pin Definition
1 NC
2 RTC Power
3 GND
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.

AT/ATX Selection

Connector type: 1x3 3-pin header, 2.0mm pitch
Connector location: JP6
1 3
Pin Settings
1-2 On AT Mode
2-3 On ATX Mode
2-3 On: default
Pin Definition
1 AUTO (AT MODE)
2 PWRBT In
3 Manual (ATX MODE)
9
eLITE610 User Manual