Advanced - Nexcom PPC-240T-HW-01 User Manual

Chapter 4: BIOS Setup

Advanced

The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main Advanced Chipset Boot
CPU Configuration
SATA Configuration
AMT Configuration
USB Configuration
IT8528 Super IO Configuration
IT8528 HW Monitor
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
Security Save & Exit
CPU Configuration Parameters
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
CPU Configuration
This section is used to configure the CPU.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
CPU Configuration
Intel(R) Core(TM) CPU i5-4300U CPU @ 1.90GHz
CPU Signature
Processor Family
Microcode Patch
FSB Speed
Max CPU Speed
Min CPU Speed
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-x Technology
Intel SMX Technology
64-bit
EIST Technology
CPU C3 state
CPU C6 state
CPU C7 state
L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Hyper Threading
Enables or disables hyper-threading technology.
Active Processor Cores
Select the number of cores to enable in each processor package.
Limit CPUID Maximum
The CPUID instruction of some newer CPUs will return a value greater
than 3. The default is Disabled because this problem does not exist in the
Windows series operating systems. If you are using an operating system
other than Windows, this problem may occur. To avoid this problem, enable
this field to limit the return value to 3 or lesser than 3.
52
▲
Enabled for Windows XP and
Linux (OS optimized for
Hyper-Threading Technology)
and Disabled for other OS (OS
40651
not optimized for
6
Hyper-Threading Technology).
1c
When Disabled only one thread
100 MHz per enabled core is enabled.
1900 MHz
800 MHz
2600 MHz
2
Supported
Supported
Supported
→←: Select Screen
Supported
↑↓: Select Item
Supported
Enter: Select
+/-: Change Opt.
Supported
F1: General Help
Supported
F2: Previous Values
Supported
F3: Optimized Defaults
F4: Save & Exit
32 kB x 2
ESC: Exit
32 kB x 2
256 kB x 2
3072 kB
(M)PPC-240T-HW-01 User Manual