Advanced - Nexcom TPPC 2401 User Manual

Chapter 4: BIOS Setup

Advanced

The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset Security
► ACPI Settings
► IT8528 Super IO Configuration
► IT8528 H/W Monitor
►
Power Management Configuration
► CPU Configuration
► USB Configuration
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Save & Exit
System ACPI Parameters.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
ACPI Settings
This section is used to configure ACPI settings.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset
ACPI Settings
Enable Hibernation
ACPI Sleep State
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
Enable Hibernation
Enables or disables system ability to hibernate (OS/S4 Sleep State). This
option may not be effective with some OS.
ACPI Sleep State
Select the highest ACPI sleep state the system will enter when the suspend
button is pressed. The options are Suspend Disabled and S3 (Suspend to
RAM).
40
PCIPnP Security Exit
Enables or Disables System
ability to Hibernate (OS/S4
Sleep State). This option may
[Enabled]
be not effective with some OS.
[S3 (Suspend to RAM)]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
TPPC 2401/2701/3201 User Manual