Table of Contents
Advertisement
Problem
The display shows "F102".
The display shows an error
code that is not in this table.
There is water inside the
oven.
The indicator
is off.
The indicator
is on.
The steam cooking does not
work.
The steam cooking does not
work.
It takes more than three mi-
nutes to empty the water
tank or the water leaks from
the steam inlet opening.
Possible cause
• You did not fully close
the door.
• The door lock is defec-
tive.
There is an electrical fault.
There is too much water in
the tank.
There is not enough water in
the tank.
There is no water in the tank. Fill the tank. If the indicator
Lime obstructs the hole.
There is no water in the tank.
There are lime deposits in
the oven.
ENGLISH
Remedy
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows
"F102" again, contact the
Customer Care Depart-
ment.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
Deactivate the oven and
wipe the water with a cloth
or sponge.
Fill the tank with water until
the indicator turns on. If wa-
ter starts to leak in the oven,
and the indicator is still off,
contact a qualified service
engineer.
is still on, contact a qualified
service engineer.
Check the steam inlet open-
ing. Remove the lime.
Fill the water tank.
Clean the water tank. Refer
to "Cleaning the water
tank".
41
Advertisement
Table of Contents
