Table of Contents
Advertisement
1. Prepare the draining pipe (C),
included in the package with the user
manual. Put the connector (B) onto
one of the ends of the draining pipe.
2. Put the second end of the draining
pipe (C) into a container. Put it at a
lower position than the outlet valve
(A).
8. CLOCK FUNCTIONS
8.1 Clock functions table
Clock func-
tion
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE
MINDER
A
B
C
Application
To show or change the
time of day. You can
change the time of day
only when the oven is off.
To set how long the oven
works. Use only when a
heating function is set.
To set when the oven
turns off. Use only when a
heating function is set.
Combination of DURA-
TION and END function.
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
3. Open the oven door and put the
connector (B) into the outlet valve
(A).
4. Push the connector again and again
to empty the water tank.
The water may remain inside after
the display shows:
water flow from the water outlet
valve stops.
5. Remove the connector from the valve
when the water stops flowing.
Do not use the drained
water to fill the water tank
again.
8.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Turn the knob for the temperature to
set the hours.
2. Press
to confirm and set the
minutes.
The display shows
hour. "00" flashes.
3. Turn the knob for the temperature to
set the current minutes.
4. Press
to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day
flashes in the display.
8.3 Setting the DURATION
function
1. Set a heating function.
ENGLISH
13
Wait until the
and
and the set
Advertisement
Table of Contents
