Table of Contents
Advertisement
10
www.aeg.com
5. CONTROL PANEL
5.1 Buttons
Sensor field / Button
5.2 Display
H
6. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
To set the Time of day refer
to "Clock functions"
chapter.
6.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the oven.
Refer to "Care and cleaning" chapter.
Clean the oven and the accessories
before the first use.
Put the accessories and the removable
shelf supports back to their initial
position.
Function
MINUTE MIND-
ER
CLOCK
TEMPERATURE
A
B
G
F
E
Description
To set the MINUTE MINDER. Hold it for
more than 3 seconds to turn on or turn off
the oven lamp.
To set a clock function.
To check the oven temperature or the
temperature of the core temperature sen-
sor (if applicable). Use only while a heat-
ing function operates.
A. Timer / Temperature
C
B. Heat-up and residual heat indicator
C. Water drawer
D. Core temperature sensor (selected
models only)
E. Door lock (selected models only)
F. Hours / minutes
D
G. Demo mode (selected models only)
H. Clock functions
6.2 Preheating
Preheat the empty oven before first use.
1. Set the function
maximum temperature.
2. Let the oven operate for 1 hour.
3. Set the function
maximum temperature.
4. Let the oven operate for 15 minutes.
5. Turn off the oven and let it cool
down.
Accessories can become hotter than
usual. The oven can emit an odour and
smoke. Make sure that the airflow in the
room is sufficient.
. Set the
. Set the
Advertisement
Table of Contents
