ACME Ellipsoidal 10 DMX User Manual page 6

Channel Mode
Press the MENU button to show
button and the display will blink. Use the DOWN and UP button to select
1ch or 2ch. Once the mode has been selected, press the ENTER button to
setup, to go back to the functions without any change press the MENU
button again. Hold and press the MENU button about one second or wait
for one minute to exit the menu mode.
DMX State
Press the MENU button up to when the
Press the ENTER button and the display will blink. Use the DOWN and UP
button to select the
Once the mode has been selected, press the ENTER button to setup, to go
back to the functions without any change press the MENU button again.
Hold and press the MENU button about one second or wait for one minute
to exit the menu mode.
Dimmer Mode
Press the MENU button up to when the
Press the ENTER button and the display will blink.. Use the DOWN and UP
button to select the
(dimmer 3) or
(blackout mode) or
(dimmer 1),
(dimmer 4). Once the mode has been selected,
5F
on the display. Press the ENTER
is shown on the display.
is shown on the display.
(dimmer 2),
(last state).