ACME Ellipsoidal 10 DMX User Manual page 5

MENU
DMX Address
Press the MENU button up to when the
Press the ENTER button and the display will blink. Use the DOWN and UP
button to change the value from 1 to 512. Once the mode has been
selected, press the ENTER button to setup, to go back to the functions
without any change press the MENU button again. Hold and press the
MENU button about one second or wait for one minute to exit the menu
mode.
DMX Address
Channel Mode
DMX State
Dimmer Mode
Led
Display Inversion
Auto Test
Fixture Hours
Software Version
4F
Manual Mode
is shown on the display.