Removing The Doors - Cisco Carrier Routing System CRS-1 Installation Manual

Removing the Doors

Removing the Doors
To remove the doors from the Cisco CRS 4-slot line card chassis, follow these steps:
Step 1 Open the door you want to remove.
Step 2 While supporting the door with one hand, reach inside the door, pull out the knob latch, then lift the latch
out from the upper door mounting bracket.
With both hands grasping the door, lift the door out of the lower door mounting bracket.
Step 3
Step 4 Place the door in a safe storage box.
Step 5 Repeat this procedure for the other door.
Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide
5-8
Chapter 5 Installing and Removing the Doors and Grille
OL-10971-10