Location And Slot Numbers For The Rps, Mscs, Fps, Lsps, And Plims - Cisco Carrier Routing System CRS-1 Installation Manual

Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components

Location and Slot Numbers for the RPs, MSCs, FPs, LSPs, and PLIMs

The route processors, MSCs, FPs, LSPs, and PLIMs are installed in the front of chassis. Note that FP
cards are installed in the MSC slots.
Figure 4-16
Figure 4-16
5
6
7
8
1 MSC slot 0
2 MSC slot 1
3 MSC slot 2
4 MSC slot 3
5 PLIM slot 0
6 PLIM slot 1
OL-10971-10
shows the location and slot numbers for these cards:
Cisco CRS 4-Slot Line Card Chassis Slot Numbers—Front (PLIM) Side
Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide
How to Install or Remove a Route Processor Card
1
2
3
4
9
10
11
12
7 PLIM slot 2
8 PLIM slot 3
9 RP slot (RP0)
10 RP slot (RP1)
11 Air intake
12 AC or DC power shelf
4-25