How to Install or Remove an MSC, FP, or LSP
Verifying the Installation of an MSC, FP, or LSP
This section describes how to verify that a line card has been properly installed.
Figure 4-23
Figure 4-23
CRS-MSC Front Panel
1
1 Status LED
Figure 4-24
Figure 4-24
CRS-MSC-B Front Panel
CRS-MSC-B
SN
1
2
1 Status LED
Figure 4-25
Figure 4-25
CRS-MSC-140G Front Panel
1
2
1 Status LED
Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide
4-40
Chapter 4
Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components
shows the front panel of the CRS-MSC,
shows the front panel of the CRS-MSC-B.
shows the front panel of the CRS-MSC-140G.
2 Alphanumeric LEDs
2 Alphanumeric LEDs
2 Alphanumeric LEDs
2
CLEI
PIDVID
B 1
OL-10971-10