Installing the SCE 2000 Platform
Attaching the Brackets to the SCE 2000
Before installing the SCE 2000 in the rack, you must first install an appropriate rack-mount
bracket on each side of the front of the SCE 2000, as illustrated in the following figure. See Tools
and Parts Required (on page 4-2) for a listing of the parts and tools required for installing the
rack–mount.
To install the rack-mount brackets on the SCE 2000 chassis, complete the following steps:
Step 1
Step 2
Figure 4-4: Attaching the Mounting Brackets (4-post)
SCE 2000 4xGBE Installation and Configuration Guide
4-8
Align the rack-mount bracket to the side of the SCE 2000. Choose the proper bracket for
your installation (2-post rack or 4-post rack) as illustrated in Rack-Mounting a SCE 2000
Platform
("Rack-Mounting a SCE 2000
Insert and tighten three screws.
Chapter 4
Installation and Maintenance
Platform" on page 4-7).
OL-7824-02