Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual page 127

Chapter 8 Troubleshooting
Copying the User Log
You can view the log file by copying it to an external source or to disk. This command copies
both log files to the local SCE 2000 platform disk or any external host running a FTP server.
To copy the user log to an external source, complete the following steps:
Step 1
The SCE 2000# prompt appears.
To copy the user log to an internal location, complete the following steps:
Step 1
The SCE 2000# prompt appears.
Viewing the User Log
This command is not recommended when the user log is large. Copy a large log to a file to view it (see
Note
Copying the User Log (on page 8-5))
To view the user log, complete the following steps:
Step 1
The user log appears, followed by the SCE 2000
OL-7824-02
From the SCE 2000# prompt, type logger get user-log file-name
ftp://username:password@ipaddress/path and press Enter.
From the SCE 2000# prompt, type logger get user-log file-name
target-filename
#
From the SCE 2000 prompt, type more user log and press Enter.
and press Enter.
#
prompt.
SCE 2000 4xGBE Installation and Configuration Guide
Troubleshooting Overview
8-5