Basic Sce 2000 Platform Operations; Starting The Sce 2000 Platform; Checking Conditions Prior To System Startup - Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual

Basic SCE 2000 Platform Operations

This chapter describes how to start up the SCE 2000 platform, reboot, and shutdown. It also
describes how to manage configurations.
This chapter contains the following sections:
•

Starting the SCE 2000 Platform

•
Managing SCE 2000 Configurations
•
Performing Complex Configurations
•
Rebooting and Shutting Down the SCE Platform 7-11
Starting the SCE 2000 Platform
The procedures for starting the SCE 2000 platform are explained in the following sections:
Checking Conditions Prior to System Startup (on page 7-1)
•
Starting the System and Observing Initial Conditions (on page 7-2)
•

Checking Conditions Prior to System Startup

Check the following conditions before you start your SCE 2000 platform:
Both power supply units are installed and connected
•
First-time startup at installation:
•
Subsequent startups
•
OL-7824-02
• SCE 2000 platform connected to local console (CON port)
The console terminal is turned on and properly configured
•
Line and Cascade interfaces are properly cabled (optional)
•
SCE 2000 platform is connected to at least one of the following types of management
•
stations:
Direct connection to local console (CON port)
•
Remote management station via the LAN (Mng port)
•
7-1
7-4
7-10
SCE 2000 4xGBE Installation and Configuration Guide
C H A P T E R 7
7-1