Table of Contents
Advertisement
Safety features
Safety switch-off
Safety switch-off if the sensors are
covered
Your SmartLine appliance will turn off
automatically if one or several of the
sensor controls remain covered for
longer than 10 seconds, for example,
by finger contact, food boiling over or
by an object such as an oven glove or
tea towel. flashes briefly above the
sensor control and a tone will sound.
If you remove the obstruction and/or
clean the appliance, goes out and the
SmartLine appliance is ready for use
again.
Safety switch-off with an overlong
cooking time
The safety switch-off mechanism is
triggered automatically if a heating
element is heated for an unusually long
period of time. This time depends on
the power level selected. If it has been
exceeded, the heating element
switches off and the residual heat
indicator appears. The SmartLine
appliance can now be used again as
normal.
The SmartLine appliance is
programmed to safety setting 0 at the
factory. If required, you can set a
higher safety setting with a shorter
maximum operating time (see chart).
30
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the
number are only available if the power level
range has been extended (see "Power level
range").
** Factory default setting
Maximum operating time
[h:min]
Safety setting
0**
1
10:00
8:00
5:00
10:00
7:00
4:00
5:00
4:00
3:00
5:00
3:30
2:00
4:00
2:00
1:30
4:00
1:30
1:00
4:00
1:00
0:30
4:00
0:42
0:24
4:00
0:30
0:20
4:00
0:30
0:18
1:00
0:24
0:10
2
Advertisement
Table of Contents
