Problem
1 and a number, e.g. 1-0
flash alternately with a 3
digit number in the
timer display.
alternating with
numbers flashes in the
timer display.
Possible cause and remedy
Heating element malfunction
Interrupt the power supply to the SmartLine
appliance for approx. 1 minute.
If the problem persists after power is restored,
please contact Miele.
The overheating protection mechanism has been
activated.
See "Overheating protection".
, or
The fan is blocked or defective.
Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
If this fault code continues to appear in the
display, contact Miele.
and other numbers
There is a fault in the electronic module.
Interrupt the power supply to the SmartLine
appliance for approx. 1 minute.
If the problem persists after power is restored,
please contact Miele.
Problem solving guide
39