Safety Switch-Off - Miele KMDA 7676 Operating And Installation Instructions

Table of Contents

Advertisement

Safety switch-off

Sensor controls are covered
Your hob will turn off automatically if
one or several of the sensor controls re-
main covered for longer than
10 seconds; for example, by finger con-
tact, food boiling over or by an object
such as an oven glove or tea towel. 
will flash briefly in the timer display and
a tone will sound.
 will go out once you have removed
the object and/or cleaned the hob and
the hob will be ready to use again.
Excessive operating time
The safety switch-off mechanism is
triggered automatically if a cooking
zone is heated for an unusually long
period of time. This time depends on
the power level selected. If it has been
exceeded, the cooking zone switches
off and the residual heat indicator ap-
pears. If you switch the cooking zone
off and on again, it is ready for opera-
tion again.
You can adjust the safety switch-off by
changing the safety setting (see "Ad-
justing settings").
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the num-
ber are only available if the power level
range has been extended (see "Setting
ranges").
** Factory default setting
Familiarisation
Maximum operating time
[h:min]
Safety setting
0**
1
10:00
8:00
5:00
10:00
7:00
4:00
5:00
4:00
3:00
5:00
3:30
2:00
4:00
2:00
1:30
4:00
1:30
1:00
4:00
1:00
0:30
4:00
0:42
0:24
4:00
0:30
0:20
4:00
0:30
0:18
1:00
0:24
0:10
2
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kmda 7676 fl-aKmda 7676 fl-u

Table of Contents