Miele KM 6629 Operating And Installation Instruction Manual
Ceramic hobs with induction
Hide thumbs
Also See for KM 6629:
- Operating and installation instruction (84 pages) ,
- Operating and installation instructions (76 pages)
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Miele KM 6629
Summary of Contents for Miele KM 6629
- Page 1 Operating and installation instructions Ceramic hobs with induction To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 10 378 321...
-
Page 2: Table Of Contents
Caring for the environment ................ 14 Guide to the appliance .................. 15 Hob........................15 KM 6629 / KM 6639 / KM 6839................ 15 KM 6669 / KM 6679 / KM 6879................ 16 KM 6699 ...................... 17 Controls / Indicators....................18 Cooking zones....................... - Page 3 Programming ....................... 45 Cleaning and care .................... 50 Problem solving guide .................. 52 Optional accessories .................. 55 Miele@home / Con@ctivity ................. 56 To access programming mode................56 Safety instructions for installation.............. 57 Safety distances .................... 58 Hob with frame or bevelled edge............... 62 Installation notes ....................
- Page 4 Contents Product data sheets ................... 76 Conformity declaration .................. 80...
-
Page 5: Warning And Safety Instructions
They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep these instructions in a safe place and ensure that new users... - Page 6 Warning and Safety instructions Correct application This hob is intended for domestic use and use in other similar environments. This hob is not intended for outdoor use. It is intended for domestic use only to cook food and keep it warm.
- Page 7 Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the hob unless they are constantly supervised. Children over 8 years of age may use the hob without supervision if its operation has been clearly explained to them and they are able to use it safely.
- Page 8 Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. Damage to the hob can compromise your safety. Check the hob for visible signs of damage. Do not use the hob if it is damaged.
- Page 9 Warning and Safety instructions Miele can only guarantee the safety of the appliance when genuine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts. The hob is not intended for use with an external timer switch or a remote control system.
- Page 10 Warning and Safety instructions Correct use The hob gets hot when in use and remains hot for a while after being switched off. There is a danger of burning until the residual heat indicators go out. Oil and fat can overheat and catch fire. Do not leave the hob unattended when cooking with oil and fat.
- Page 11 Warning and Safety instructions You could burn yourself on the hot hob. Protect your hands with heat-resistant pot holders or gloves when handling hot pots and pans. Do not let them get wet or damp, as this causes heat to transfer through the material more quickly with the risk of scalding or burning yourself.
- Page 12 Warning and Safety instructions Because induction heating works so quickly, the base of the pan could, under certain circumstances, heat up to the temperature at which oil or fat self-ignites within a very short time. Never leave the hob unattended during use! ...
- Page 13 Warning and Safety instructions Cleaning and care Do not use a steam cleaning appliance to clean this hob. The steam could reach electrical components and cause a short circuit. If the hob is built in over a pyrolytic oven, the hob should not be used whilst the pyrolytic process is being carried out, as this could trigger the overheating protection mechanism on the hob (see relevant section).
-
Page 14: Caring For The Environment
/ recycling centre for electrical and electronic appliances, or contact your dealer or Miele for advice. You are also responsible (by law, depending on country) for deleting any personal data that may be stored on the appliance being disposed of. -
Page 15: Guide To The Appliance
Guide to the appliance KM 6629 / KM 6639 / KM 6839 a Cooking zone with TempControl* and TwinBooster b Cooking zone with TwinBooster c PowerFlex cooking zone with TwinBooster d PowerFlex cooking zone with TwinBooster cd can be combined to form a PowerFlex cooking area e Controls / Indicators * On some hobs the ceramic surface in the middle of the cooking zone with... - Page 16 Guide to the appliance KM 6669 / KM 6679 / KM 6879 a Cooking zone with TwinBooster b Cooking zone with TempControl* and TwinBooster c Cooking zone with TwinBooster d PowerFlex cooking zone with TwinBooster e PowerFlex cooking zone with TwinBooster de can be combined to form a PowerFlex cooking area f Controls / Indicators * On some hobs the ceramic surface in the middle of the cooking zone with...
- Page 17 Guide to the appliance KM 6699 a Cooking zone with TempControl* and TwinBooster b PowerFlex cooking zone with TwinBooster c PowerFlex cooking zone with TwinBooster bc can be combined to form a PowerFlex cooking area d Cooking zone with TwinBooster e Controls / Indicators * On some hobs the ceramic surface in the middle of the cooking zone with TempControl is transparent and the temperature sensor is visible.
-
Page 18: Controls / Indicators
Guide to the appliance Controls / Indicators Sensors For switching the hob on and off 1, 2 , 3 ..9, B Numerical keybank - For setting the power level: 1–9 = Power level B = Booster - For setting a minute minder - For setting a switch-off time ... - Page 19 Guide to the appliance Timer a Minute minder sensor b Cooking zone indicator c Timer display : to Duration : System lock/safety lock activated Demonstration mode activated alternating with d Sensor for selecting the cooking zone automatic switch-off...
-
Page 20: Cooking Zones
Guide to the appliance Cooking zones Cooking zone KM 6629 / KM 6639 / KM 6839 Ø in cm* Rating in watts for 230 V** 16–23 Normal 2300 TwinBooster, level 1 3000 TwinBooster, level 2 3650 10–16 Normal 1400... - Page 21 Guide to the appliance Cooking zone KM 6669 / KM 6679 / KM 6879 Ø in cm* Rating in watts for 230 V** 10–16 Normal 1400 TwinBooster, level 1 1750 TwinBooster, level 2 2200 16–23 Normal 2300 TwinBooster, level 1 3000 TwinBooster, level 2 3650...
- Page 22 Guide to the appliance Cooking zone KM 6699 Ø in cm* Rating in watts for 230 V** 16–23 Normal 2300 TwinBooster, level 1 3000 TwinBooster, level 2 3650 15–23 Normal 2100 TwinBooster, level 1 3000 TwinBooster, level 2 3650 ...
-
Page 23: Before Using For The First Time
Before using for the first time Please stick the extra data plate for Switching on the hob for the the appliance supplied with this first time documentation in the space provided The metal components have a in the “After sales service” section of protective coating which may give off a this booklet. -
Page 24: Induction
Induction How it works Risk of burning due to hot items. When the appliance is switched on An induction coil is located under each either deliberately or by mistake, or induction cooking zone. When a when there is residual heat present, cooking zone is switched on, this coil there is the risk of metal items placed creates a magnetic field which impacts... -
Page 25: Noises
Induction Noises When using an induction hob, the following noises can occur in the pan, depending on what it is made of and how it has been constructed. Buzzing on the higher power settings. This will decrease or cease altogether when the power setting is reduced. -
Page 26: Cookware
Induction – To make optimum use of the cooking Cookware zones, choose pans with a suitable Suitable pans include: base diameter (see chapter “Cooking zones”). If the pan is too small it will – stainless steel pans with a magnetic not be recognised and the set power base level will flash in the numerical... -
Page 27: Tips On Saving Energy
Tips on saving energy – Use a lid whenever possible to minimise heat loss. – Select a smaller pan when cooking small quantities. A smaller pan uses less energy than a larger pan with very little in it. – Cook with as little water as possible. –... -
Page 28: Setting Range
Setting range The hob is programmed with 9 power levels at the factory. If you wish to fine-tune a setting, you can extend the power setting range to 17 power levels (see “Programming”). Setting range Default Extended setting settings (9 power (17 power levels) levels) -
Page 29: Operation
Operation Using the appliance Malfunction due to dirty and/or covered sensor controls. This ceramic hob is equipped with electronic sensor controls which react If the sensor controls are dirty or covered this could cause them to fail to finger contact. For safety reasons, in order to switch the appliance on, the to react, to activate a function or On/Off ... -
Page 30: Switching On The Hob
Operation Switching off Risk of fire with overheated food. Unattended food can overheat and To switch a cooking zone off, touch the sensor on the appropriate catch alight. keybank. Do not leave the hob unattended whilst it is being used. ... -
Page 31: Tempcontrol
Operation Notes on use TempControl – Make sure that the ceramic surface is TempControl monitors and controls the kept clean, particularly in the area of temperature during frying: the sensor in the middle of the – the fat cannot overheat, cooking zone. - Page 32 Operation Activating TempControl Frying level Place a pan on the cooking zone and Potato pancakes add frying fat/oil if necessary. Fried potatoes made from raw potatoes Touch the sensor for the frying level Meat loaf you want to use ( ,, ). Steaks The sensor for the frying level selected will start to pulsate.
-
Page 33: Power Level Setting - Extended Setting Range
Operation Power level setting - Extended PowerFlex area setting range The PowerFlex cooking zones combine automatically to form a PowerFlex Touch the numerical keybank in cooking area when you place a between two number sensors. sufficiently large pot or pan on them The numbers to the left and right of the (see “Guide to the appliance - Hob”). -
Page 34: Auto Heat-Up
Operation Auto heat-up Continued Heat-up time cooking setting* [min : sec] When Auto heat-up has been activated, the cooking zone switches on Approx. 0:15 automatically at the highest power Approx. 0:15 setting and then switches to the continued cooking setting. The heat-up Approx. -
Page 35: Booster
Operation Activating TwinBooster, level 1 Booster Place a pan on the cooking zone you The cooking zones are equipped with a want to use. TwinBooster. Select a power level if necessary. When activated, the power is boosted so that large quantities can be heated ... -
Page 36: Keeping Warm / Warming Up
Operation To switch the Keeping warm setting Keeping warm / warming up on/off The Keeping warm setting is for Touch the or sensor. keeping food that has just been cooked warm, i.e. food that is still hot. It is not for reheating food that has gone cold. -
Page 37: Timer
Timer The hob has to be switched on if you The functions can be used at the same wish to use the timer. time. The shortest time is always A duration of between 1 minute (:) displayed and the sensor control and 9 hours 59 minutes (:) can be (minute minder) or the indicator light of the cooking zone for automatic switch-... -
Page 38: Switching Off A Cooking Zone Automatically
Timer touch the sensor repeatedly until Switching off a cooking zone the indicator light for the zone you automatically require flashes. You can set a time after which the Changing the switch-off time cooking zone will switch off automatically. This function can be ... -
Page 39: Additional Functions
Additional functions Stop&Go Recall When Stop&Go is activated, the power If the hob is accidentally switched off of all cooking zones in use is reduced to during use, you can use this function to power level 1. restore all the settings. The hob must The cooking zone power levels and the be switched on again within timer settings cannot be altered and the... -
Page 40: Wipe Protection
Additional functions Wipe protection Displaying hob data The model number and software The hob sensors can be locked for version of the hob can be displayed. 20 s in order, for example, to remove There must not be any pots or pans on soiling. -
Page 41: Safety Features
Safety features The safety lock is activated when the System lock / Safety lock hob is switched on. When the safety Your hob is equipped with a system lock is activated, the hob can be lock and a safety lock to prevent the operated only under certain conditions: hob and the cooking zones being –... - Page 42 Safety features Deactivating the safety lock Touch and hold the and sensors at the same time for 6 seconds. will appear briefly in the timer display and then the time will count down. The safety lock is deactivated once the time has elapsed.
-
Page 43: Safety Switch-Off
Safety features Safety switch-off Power level* Maximum operating time [h:min] Sensor controls are covered Safety setting Your hob will turn off automatically if one or several of the sensors remain 10:00 8:00 5:00 covered for longer than 10 seconds, for example, by finger contact, food boiling 10:00 7:00... -
Page 44: Overheating Protection
– The set power level will be reduced. If, despite removing the cause, the overheating protection mechanism – The cooking zone turns off triggers again, contact Miele Service. automatically. will flash alternately with in the timer display. You can use the cooking zone again as usual when the fault code has gone out. -
Page 45: Programming
Programming You can programme certain settings on To access programming mode the hob to suit your personal needs. With the hob switched off, touch Several settings can be changed in the and sensors at the same succession. time until the symbol and After accessing programming mode, appear in the timer display. - Page 46 C:01 System lock activated automatically P:09 Maximum operating time C:00 Safety setting 0 C:01 Safety setting 1 C:02 Safety setting 2 P:10 Miele@home/Con@ctivity C:00 Not available C:01 Signed off C:02 Signed on P:12 Sensor reaction speed C:00 Slow C:01 Standard...
- Page 47 Programming Settings Programme Code P:15 Permanent pan recognition C:00 Not active C:01 Active P:16 Maximum pan temperature C:00 160 °C with manual frying and C:01 170 °C cooking C:02 180 °C C:03 190 °C C:04 200 °C C:05 210 °C C:06 220 °C C:07 230 °C C:08 240 °C C:09 250 °C P:17...
- Page 48 Programming Settings Programme Code Frying level temperature P:20 C:00 180 °C C:01 185 °C C:02 190 °C C:03 195 °C C:04 200 °C C:05 205 °C C:06 210 °C C:07 215 °C C:08 220 ° Frying level temperature P:21 C:00 200 °C C:01 205 °C C:02 210 °C C:03 215 °C C:04 220 °C C:05...
- Page 49 Programming Settings Programme Code P:25 Keeping warm plus C:00 50 °C temperature C:01 55 °C C:02 60 °C C:03 65 °C C:04 70 °C C:05 75 °C C:06 80 °C C:07 85 °C C:08 90 °C Unlisted programmes are not assigned. The factory setting is shown in bold. After the hob has been switched on appears in the timer display for a few seconds. In the text and charts, the extended power levels are shown with a dot after the number for better understanding.
-
Page 50: Cleaning And Care
Cleaning and care Clean the hob after every use. Risk of burning due to hot cooking zones. Dry the hob thoroughly after cleaning with water to avoid limescale residue. The cooking zones will be hot after use. Unsuitable cleaning agents Switch the hob off. - Page 51 Then carefully scrape off these residues immediately whilst they are Then clean the ceramic glass surface still hot, using a scraper blade with the Miele ceramic and stainless suitable for use on glass. steel hob cleaner (see “optional accessories”) or with a proprietary ...
-
Page 52: Problem Solving Guide
There is no power to the hob. zones will not switch Check whether the mains fuse has tripped. Contact an electrician or Miele Service (for the minimum fuse rating, see data plate). There may be a technical fault. Disconnect the appliance from the mains electricity supply for approx. - Page 53 Problem solving guide Problem Cause and remedy The hob has switched One or more of the sensor controls are covered, e.g. off automatically. When by finger contact, food boiling over or an object. the element is switched Clean off any dirt and/or remove the object (see back on, ...
- Page 54 Disconnect the hob from the mains electricity display and a buzzer supply. sounds. Call Miele Service. The hob must be connected to the mains according to the wiring diagram. 1 and a number, e.g. 1-0 Cooking zone fault flashes alternately with ...
-
Page 55: Optional Accessories
Miele dealer. Microfibre cloth Pans Miele offer a wide range of pans which are perfect for Miele hobs. Please refer to the Miele website for more details on individual products. Removes finger marks and light soiling –... -
Page 56: Miele@Home / Con@Ctivity
Signing off the hob master appliance. If you want to sign the hob off from – To sign the hob on to Con@ctivity, Miele@home, first carry out the you must first sign the cooker hood signing off procedure on the master appliance. -
Page 57: Safety Instructions For Installation
Safety instructions for installation Damage risk from incorrect installation. Incorrect installation can cause damage to the hob. The hob must only be installed by a qualified person. Risk of electric shock. Incorrect connection to the mains supply may result in an electric shock. The hob must be connected to the electrical supply by a qualified person only. -
Page 58: Safety Distances
Safety distances Safety distance above the hob A minimum safety distance must be maintained between the appliance and the cooker hood above it. See the cooker hood manufacturer's operating and installation instructions for details. If the manufacturer's instructions are not available for the cooker hood or if any flammable objects (e.g. - Page 59 Safety distances Safety distances to the sides and back of the hob Ideally the hob should be installed with plenty of space on either side. There may be a wall at the rear or a tall unit or wall on one side (right or left) (see illustrations).
- Page 60 Safety distances Minimum safety distances Interim shelf underneath the hob It is not necessary to fit an interim shelf underneath the hob but one may be To ensure sufficient ventilation to the fitted if you wish. hob, a certain gap must be left between the underside of the hob and any oven, Leave a gap of 10 mm at the back of interim shelf or drawer.
- Page 61 Safety distances Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e.g. wood) a minimum safety distance ...
-
Page 62: Hob With Frame Or Bevelled Edge
Hob with frame or bevelled edge Tiled worktop Installation notes Seal between the hob and the worktop Grout lines and the hatched area underneath the hob frame must be smooth and even. If they are not the hob will not sit flush with the worktop and the sealing strip underneath the Do not use sealant between the hob hob will not provide a good seal... -
Page 63: Building-In Dimensions
Hob with frame or bevelled edge Building-in dimensions KM 6629 a Front b Casing depth c Mains connection box The mains connection cable (1440 mm long) is supplied separately with the hob. - Page 64 Hob with frame or bevelled edge KM 6669 a Front b Casing depth c Mains connection box The mains connection cable (1440 mm long) is supplied separately with the hob.
- Page 65 Hob with frame or bevelled edge KM 6699 a Front b Casing depth c Mains connection box The mains connection cable (1440 mm long) is supplied separately with the hob.
-
Page 66: Installation
Hob with frame or bevelled edge Install the hob Installation Feed the mains connection cable Prepare the worktop down through the cut-out. Create the worktop cut-out as shown Place the hob centrally in the cut-out. in the building-in diagram. Remember When doing this make sure that the to maintain the minimum safety seal of the appliance sits flush with... -
Page 67: Flush-Fitted Hobs
Flush-fitted hobs The hob can be installed Installation notes – in a suitable cut-out in a natural stone Flush fit hobs are only suitable for worktop. installation in natural stone (granite, marble), tiled or solid wood worktops. – in a suitable cut-out in a tiled or solid Certain models are suitable for wood worktop or a glass worktop building into glass worktops - please... -
Page 68: Building-In Dimensions
Flush-fitted hobs Building-in dimensions KM 6639 / KM 6839 a Front b Appliance height c Mains connection box d Stepped cut-out The mains connection cable (1440 mm long) is supplied separately with the hob. Please observe the detailed diagrams for cut-out dimensions in natural stone worktops. - Page 69 Flush-fitted hobs KM 6679 / KM 6879 a Front b Appliance height c Mains connection box d Stepped cut-out The mains connection cable (1440 mm long) is supplied separately with the hob. Please observe the detailed diagrams for cut-out dimensions in natural stone worktops.
-
Page 70: Installation
Flush-fitted hobs KM 6679 / KM 6879 Installation Natural stone worktops d Stepped cut-out a Worktop Solid wood, tiled and glass worktops b Hob c Gap As the ceramic glass and the worktop cut-out have a certain dimensional tolerance, the size of the gap can vary (min. - Page 71 Flush-fitted hobs Prepare the worktop Create the worktop cut-out as shown in the hob and inset diagrams. Remember to maintain the minimum safety distances (see “Safety distances”). Solid wood, tiled and glass worktops: Fix a wooden frame 7 mm below the top edge of the worktop (see diagram).
-
Page 72: Electrical Connection
It must match the household considerable danger for the user. supply. Miele cannot be held liable for damage or injury caused by Please see wiring diagram for unauthorised installation, connection. (N.B. This appliance is... - Page 73 Switch the main switch from 1 (on) to connection cable, type H 05 VV-F (PVC- 0 (off) or press the test button. insulated), available from Miele. The connection data is quoted on the data plate.
- Page 74 Electrical connection Wiring diagram a b c d e 200-240 V~ 200-240 V~ 200-240 V~ (L3) 200-240 V~ 200-240 V~ b c d (L2) 200-240 V~...
-
Page 75: After Sales Service
In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer or Miele Service. Contact information for Miele Service can be found at the end of this document. Please note that telephone calls may be monitored and recorded for training purposes and that a call-out charge will be applied to service visits where the problem could have been resolved as described in this booklet. - Page 76 Information for domestic electric hobs In acc. with regulation (EU) No. 66/2014 MIELE Model name / identifier KM 6629 Number of cooking zones and/or areas For circular cooking zones: diameter of useful 1. = Ø 160-230 mm surface area/cooking zone 2.
- Page 77 Product data sheets Information for domestic electric hobs In acc. with regulation (EU) No. 66/2014 MIELE Model name / identifier KM 6669 Number of cooking zones and/or areas For circular cooking zones: diameter of useful 1. = Ø 100-160 mm surface area/cooking zone 2.
- Page 78 Product data sheets Information for domestic electric hobs In acc. with regulation (EU) No. 66/2014 MIELE Model name / identifier KM 6699 Number of cooking zones and/or areas For circular cooking zones: diameter of useful 1. = Ø 160-230 mm surface area/cooking zone 2.
- Page 79 Product data sheets Information for domestic electric hobs In acc. with regulation (EU) No. 66/2014 MIELE Model name / identifier KM 6879 Number of cooking zones and/or areas For circular cooking zones: diameter of useful 1. = Ø 100-160 mm surface area/cooking zone 2.
- Page 80 Conformity declaration Miele hereby declares that the hobs listed at the end of this booklet comply with the basic requirements and other relevant regulations of Guideline 1999/5/EC. A copy of the full Declaration of Conformity can be obtained from the address on the back page.
- Page 83 Tel: +65 6735 1191 Fax. +971 4 3418 852 Fax: 011-46 900 001 Fax: +65 6735 1161 800-MIELE (64353) E-mail: customercare@miele.in E-Mail: info@miele.com.sg E-Mail: info@miele.ae Internet: www.miele.in Internet: www.miele.sg Website: www.miele.ae Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany...
- Page 84 KM 6629 / KM 6639 / KM 6669 / KM 6679 / KM 6699 / KM 6839 / KM 6879 en-GB M.-Nr. 10 378 321 / 00...
Need help?
Do you have a question about the KM 6629 and is the answer not in the manual?
Questions and answers