Miele SmartLine Tepan Yaki Operating And Installation Instructions page 8

Hide thumbs Also See for SmartLine Tepan Yaki:
Table of Contents

Advertisement

Warning and Safety instructions
Never open the casing of the appliance.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.
The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.
Faulty components must only be replaced by genuine Miele spare
parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.
The appliance is not intended for use with an external timer switch
or a remote control system.
If the plug has been removed or the connection cable is not
supplied with a plug, the appliance must be connected to the mains
supply by a suitably qualified electrician.
If the mains connection cable is damaged, it must be replaced
with a special connection cable by an electrician in order to avoid a
hazard (see "Electrical connection").
During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:
– the mains circuit breaker is switched off, or
– it is switched off at the wall socket and the plug is withdrawn from
the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.
Danger of electric shock!
Do not use the appliance if it is faulty. Switch it off immediately,
disconnect it from the mains electricity supply and contact Miele.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs 7632

Table of Contents