Table of Contents
Advertisement
Technical safety
Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and
repairs must only be carried out by a Miele authorised technician.
A damaged appliance can be dangerous. Always check for visible
signs of damage. Never use a damaged appliance.
Reliable and safe operation of this appliance can only be assured
if it has been connected to the mains electricity supply.
The appliance must not be connected to the inverter of an
autonomous power supply, e.g. a solar power system. When the
appliance is switched on, power surges could result in a safety
switch-off. This may damage the electronic unit.
The electrical safety of this appliance can only be guaranteed
when continuity is complete between it and an effective earthing
system. It is most important that this basic safety requirement is
present and tested regularly and, where there is any doubt, the
household wiring system should be inspected by a qualified
electrician.
Before connecting the appliance to the mains supply, ensure that
the connection data on the data plate (voltage and frequency) match
the mains electricity supply.
This data must correspond in order to avoid the risk of damage to
the appliance. Consult a qualified electrician if in any doubt.
Do not connect the appliance to the mains electrical supply by a
multi-socket adapter or extension lead. These are a fire hazard and
do not guarantee the required safety of the appliance.
For safety reasons, this appliance may only be used when it has
been built in.
This appliance must not be installed and operated in mobile
installations (e.g. on a ship).
Warning and Safety instructions
7
Advertisement
Table of Contents
