Safety Switch-Off - Miele KM 7678-2 FL Operating And Installation Instructions

Hide thumbs Also See for KM 7678-2 FL:
Table of Contents

Advertisement

Safety switch-off

Sensor controls are covered
Your hob will turn off automatically if
one or several of the sensors remain
covered for longer than 10 seconds, for
example, by finger contact, food boiling
over or by an object such as an oven
glove or tea towel.  flashes briefly
above the  sensor control and a tone
will sound.
 will go out once you have removed
the object and/or cleaned the hob and
the hob will be ready to use again.
Excessive operating time
The safety shut-off is triggered
automatically if a zone is heated for an
unusually long period of time. This time
depends on the power level selected. If
it has been exceeded, the heat
switches off and the residual heat
indicator appears. A power level can be
selected in the usual way.
The hob is programmed to safety
setting 0 at the factory. If required you
can set a higher safety setting with a
shorter maximum operating time (see
chart).
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the
number are only available if the power level
range has been extended (see "Setting
ranges").
** Factory default setting
Safety features
Maximum operating time
[h:min]
Safety setting
0**
1
10:00
8:00
10:00
7:00
5:00
4:00
5:00
3:30
4:00
2:00
4:00
1:30
4:00
1:00
4:00
0:42
4:00
0:30
4:00
0:30
1:00
0:24
2
5:00
4:00
3:00
2:00
1:30
1:00
0:30
0:24
0:20
0:18
0:10
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km 7878-2 fl diamondKm 7897-2 fl diamond

Table of Contents