Miele KM 530 Operating And Installation Manual
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Hob
  5. KM 553
  6. Operating and installation manual

Miele KM 530 Operating And Installation Manual

Hide thumbs Also See for KM 530:
Table of Contents

Advertisement

Quick Links

See also: Operating and Installation Instruction
Operating and Installation instructions
Ceramic hobs
KM 530 / KM 537
KM 540 / KM 541 / KM 542 / KM 543
KM 544 / KM 545 / KM 547 / KM 548
KM 550 / KM 551 / KM 552 / KM 553
en - GB
To avoid the risk of accidents or
damage to the appliance it is
essential to read these
instructions before it is installed
and used for the first time.
M.-Nr. 06 069 910

Advertisement

Table of Contents
loading

Related Manuals for Miele KM 530

Summary of Contents for Miele KM 530

  • Page 1 Operating and Installation instructions Ceramic hobs KM 530 / KM 537 KM 540 / KM 541 / KM 542 / KM 543 KM 544 / KM 545 / KM 547 / KM 548 KM 550 / KM 551 / KM 552 / KM 553...

  • Page 2: Table Of Contents

    KM 530 / KM 545 ........
  • Page 3 Contents Safety features ........... 32 Safety lock .

  • Page 4: Guide To The Appliance

    Guide to the appliance KM 540 Cooking zones: Indicator lamp for: Single circle zones Safety lock Sensor switches for: Cooking zones Timer (see "Timer sensors and display") Safety lock Hob ON/OFF...
  • Page 5 Guide to the appliance KM 544 Cooking zones: Indicator lamp for: Single circle zones Safety lock Sensor switches for: Cooking zones Timer (see "Timer sensors and display") Safety lock Hob ON/OFF...
  • Page 6 Guide to the appliance KM 530 / KM 545 Cooking zones: Indicator lamps for: Single circle zones Safety lock Double circle zone Outer circle of the double circle zone Sensor switches for: Cooking zones Timer (see "Timer sensors and display")
  • Page 7 Guide to the appliance KM 541 Indicator lamps for: Cooking zones: Safety lock Double circle zone Outer circle of the double circle zone Single circle zones Sensor switches for: Cooking zones Timer (see "Timer sensors and display") Safety lock Hob ON/OFF Switching on the outer circle of the double circle zone...
  • Page 8 Guide to the appliance KM 542 Cooking zones: Indicator lamps for: Double circle zones Safety lock Single circle zones Outer circle of the double circle zone Sensor switches for: Cooking zones Timer (see "Timer sensors and display") Safety lock Hob ON/OFF Switching on the outer circle of the double circle zone...
  • Page 9 Guide to the appliance KM 548 Cooking zones: Indicator lamps for: Double circle zones Safety lock Single circle zones Outer circle of the double circle zone Sensor switches for: Cooking zones Timer (see "Timer sensors and display") Safety lock Hob ON/OFF Switching on the outer circle of the double circle zone...
  • Page 10 Guide to the appliance KM 543 / KM 547 Cooking zones: Indicator lamps for: Double circle zone Safety lock Single circle zones Outer circle of the double circle / extended cooking zone Extended cooking zone Sensor switches for: Cooking zones Timer (see "Timer sensors and display") Safety lock...
  • Page 11 Guide to the appliance KM 537 / KM 550 / KM 551 KM 552 / KM 553 Cooking zones: Indicator lamps for: Double circle zone Safety lock Single circle zones Outer circle of the double circle / extended zone Extended cooking zone Sensor switches for: Cooking zones Timer (see "Timer sensors and...

  • Page 12: Cooking Zone Sensors And Displays

    Guide to the appliance Cooking zone sensors and displays Displays: = Cooking zone ready for use 1 to 9 = Power setting = Residual heat = Fault (see "Safety switch-off") = Auto heat-up when the power setting range has been extended P0 etc.

  • Page 13: Cooking Zones

    Guide to the appliance Cooking zones Cooking KM 540 KM 544 KM 545 zone C in cm C in cm C in cm Rating in Rating in Rating in watts watts watts (230 V) (230 V) (230 V) 21.0 2200 18.0 1800 18.0...
  • Page 14 17.0 x 26.5 2400 17.0 x 26.5 2400 14.5 1100 18.0 1800 Total: 6800 Total: 7500 Cooking KM 530 KM 537 zone C in cm C in cm Rating in watts Rating in watts (230 V) (230 V) 18.0* 1800 12.0 / 21.0...

  • Page 15: Warning And Safety Instructions

    Warning and safety instructions The electrical safety of this To avoid the risk of accidents and appliance can only be guaranteed damage to the appliance, please when continuity is complete between it read these instructions carefully and an effective earthing system which before using it for the first time.
  • Page 16 Warning and safety instructions Correct use Do not use the appliance to heat up the room. Due to the high temperatures For safety reasons this appliance radiated, objects near the appliance must only be operated after it has been could catch fire. The life of the built in.
  • Page 17 Warning and safety instructions Safety with children Keep all pans out of reach of children. Turn pan handles inwards Use the safety lock to prevent away from the edge of the hob. Danger children operating the appliance or of burning or scalding. Special hob altering the settings.
  • Page 18 Warning and safety instructions Protecting the appliance from To prevent the risk of spillages etc. burning on, remove any soiling as damage quickly as possible and ensure that pan Do not use pots and pans on the bases are clean, dry and free of ceramic hob with bases with grease.
  • Page 19 Warning and safety instructions Protection from burning and Do not cover the appliance, e.g. with a cloth, kitchen foil, etc. This could scalding be a fire hazard if the appliance is The surface of the appliance is hot switched on by mistake. when in use, and remains hot for quite If oil or fat catches fire, do not a while after being switched off.
  • Page 20 H 05 W-F or particularly important that the food is H 05 RR-F, available from the Miele completely cooked through. If in doubt, Customer Contact Centre. select a longer cooking or reheating Repairs may only be carried out by time.

  • Page 21: Caring For The Environment

    Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain materials which, if The transport and protective packing handled or disposed of incorrectly, has been selected from materials which could be potentially hazardous to are environmentally friendly for human health and to the environment.

  • Page 22: Before Using For The First Time

    Before using for the first time Heating up for the first time Please stick the extra data plate for the appliance supplied with this On hobs with bevelled glass edges, documentation in the space provided in a small gap may be visible between the "After sales service"...

  • Page 23: Calibrating The Sensors

    The electronic unit will reset the sensitivity levels of the sensors. recalibrate themselves automatically. If this is the case, recalibration will have If this does not solve the problem, to be carried out manually. please call the Miele Service department.

  • Page 24: How The Cooking Zones Work

    How the cooking zones work Single circle cooking zones have one Single circle zone heating element, whilst double circle (vario) cooking zones and extended zones have two. Depending on the model, the heating elements may be separated by an isolating ring. Each cooking zone has overheating protection (a temperature limiter), which stops the ceramic surface from...

  • Page 25: Operation

    Operation Sensors Switching on This hob is equipped with electronic The hob must be switched on before sensors which react to finger contact. any of the zones can be used. To operate a cooking zone, touch the Do not leave the appliance relevant sensor.

  • Page 26: Settings

    Operation Settings Cooking process Settings* standard extended factory settings settings** (9 settings) (17 settings) Melting butter, chocolate etc. 1 - 2 1 - 2. Dissolving gelatine Preparing yoghurt Thickening sauces containing egg yolk and butter 1 - 3 1 - 3. Warming small quantities of food/liquid Keeping warm food which sticks easily Cooking rice...

  • Page 27: Auto Heat-Up

    Operation Auto heat-up In the extended range of settings (see "Programming - P6."), A flashes When Auto heat-up has been activated, alternately with the continued cooking the cooking zone switches on setting until the heat-up time has automatically at the highest setting and finished.

  • Page 28: Switching On An Extended Area

    Operation Switching on an extended area The relevant indicator lamp will light up to show that the outer circle / extended Depending on the model of hob, the cooking zone is switched on. outer circle of a double circle zone or the extended cooking zone can be To switch the outer circle or extended cooking zone off, touch the n sensor...

  • Page 29: Switching Off And Residual Heat Indicators

    Operation Switching off and residual heat The lines of the residual heat indicator go out one after another as the cooking indicators zones cool down. The last horizontal line only goes out when the cooking To switch off a cooking zone: zone is safe to touch.

  • Page 30: Pans

    Operation Pans – Place pans carefully into position on the hob. Sliding them across the – Pans made from any material can be surface can cause scuffs and used on a ceramic hob. scratches. – However, the best pans are those –...

  • Page 31: Tips On Saving Energy

    Operation Tips on saving energy – Use as little water as possible to cook with, and reduce the power – Use a pan lid whenever possible to setting once the water has come to minimise heat loss. the boil or the oil is hot enough to fry –...

  • Page 32: Safety Features

    Safety features Safety lock To activate the safety lock: ^ Touch the safety lock sensor $ until Keep children away from the hob for their own safety. the relevant indicator lamp comes on. Your appliance is equipped with a The indicator lamp will go out after a safety lock to prevent the hob and the short while.

  • Page 33: Stop And Go

    Safety features Stop and Go To deactivate Stop and Go: ^ Touch the $ sensor until the indicator Your appliance has a Stop and Go feature which, when activated, reduces lamp goes out. the power of all switched on cooking The cooking zones will now run at the zones to setting 1.

  • Page 34: Safety Switch-Off

    Safety features Safety switch-off Safety switch-off if the sensors are covered Safety switch-off with an over-long Your hob will switch off automatically if cooking time one or several of the sensors remain covered for longer than 10 seconds, for Your hob is fitted with a safety switch-off feature in case you forget to example, by finger contact, food boiling switch it off yourself.

  • Page 35: Overheating Protection

    Safety features Overheating protection Overheating can be caused by: Each cooking zone is equipped with – switching on a cooking zone without overheating protection. An internal a pan on it. temperature limiter switches off the – heating up an empty pan. heating elements in the cooking zone –...

  • Page 36: Timer

    Timer This hob is equipped with a timer which can be used as a minute minder or to automatically switch off a zone of your choice. Both functions can be operated at the same time. Programming steps in brief Touch m Switching on from 99 to 00 minutes use the - sensor Setting the timer...

  • Page 37: Switching A Cooking Zone Off Automatically

    Timer Switching a cooking zone off The time then counts down in minutes. The time remaining can be seen in the automatically display and changed at any time by It is only possible to switch a cooking touching - or +. The cooking zone zone off automatically if a power setting power setting can also be changed at has already been selected for that...

  • Page 38: Switching Between Timer Functions

    Timer Switching between timer Timer default setting functions The timer is set at the factory so that it starts with 01 or 99 when the + or - If you are already using the timer for sensor is touched. one function and you also wish to use the other function, touch the m sensor.

  • Page 39: Cleaning And Care

    Cleaning and care For Miele branded cleaning and The appliance should be cleaned after conditioning products see "Optional each use. Allow the hob to cool down accessories". before cleaning. Wipe all coarse soiling off using a Do not use a steam cleaner to clean damp cloth.
  • Page 40 Cleaning and care Spots caused by limescale deposits, Appliances with aluminium frames water and aluminium residues (which (see data plate) are prone to have a metalic appearance) can be scratching, alkali and acid damage. removed using the ceramic hob Take great care when cleaning the cleaner.

  • Page 41: Programming

    Programming You can change the standard settings To store the new settings in memory, touch the hob ON/OFF sensor s until of your hob (see chart). the displays go out. If you do not wish to store the settings Proceed as follows: in memory, touch the safety lock sensor ^ With the hob switched off, touch the $ until the displays go out.
  • Page 42 Programming Programme* Status** Setting Demonstration mode Demonstration mode on and factory default Demonstration mode off settings Factory default settings reinstated Keypad tone when a sensor is touched Audible tone for timer Audible tone on for 10 seconds Audible tone on for 4 minutes One finger locking using $ Safety lock Three finger locking using $ and +...
  • Page 43 Programming Programme* Status** Setting H as the residual heat Residual heat indicator indicator symbol # as the residual heat indicator symbol Timer default setting 01 or 99 The most recently set time (see "Timer default setting") Timer functions Minute minder only Auto switch-off only Minute minder and Auto switch-off...

  • Page 44: Problem Solving Guide

    – switch off at the isolator, or – withdraw the mains fuse. Re-set the trip switch in the mains fuse box and switch the appliance on. If it still will not start, contact a qualified electrician or the Miele Service Department.
  • Page 45 Interrupt the power supply to the hob for approx. 1 minute. – The residual heat indicators have lit up during programming. If the problem persists after reconnecting the appliance to the power supply, please contact the Miele Service department.

  • Page 46: To Test The Power Level

    To test the power level ^ Take a note of the diameter and You can test the power level of a cooking zone by measuring how long it wattage of the cooking zone to be takes to bring a specific amount of tested (see "Guide to the appliance - water to the boil.
  • Page 47 To test the power level C cooking zone Rating in watts Quantity of water Max duration in cm for 230 V in litres in minutes (approx.) 12.0 700 / 750 13.0 14.5 1000 / 1100 14.5 1350 17.0 1500 18.0 1250 11.0 18.0...

  • Page 48: Optional Accessories

    Ceramic and stainless steel hob cleaner 250 ml Removes heavy soiling, limescale deposits and aluminium residues E-Cloth Removes finger marks and light soiling These products can be ordered via the internet (depending on country) or from the Miele Customer Contact Centre (see back cover).

  • Page 49: After Sales Service, Data Plate

    Please note that telephone calls may be monitored and recorded to improve our service. When contacting Miele, please quote the model and serial number of your appliance. These are given on the data plate. N.B. A call-out charge will be applied for service visits where the problem could have been resolved as described in these instructions.

  • Page 50: Installation

    Installation Safety instructions for The hob may not be built in over a fridge, fridge-freezer, freezer, installation dishwasher, washing machine or tumble dryer. Fit the wall units and extractor hood before fitting the hob to avoid After installing the hob, ensure that damaging the appliance.
  • Page 51 Installation Safety distance above the hob When two or more appliances are installed together below a cooker hood, e.g. an electric hob and a gas wok combiset, which have different safety distances given in the installation instructions you should select the greater distance of the two.
  • Page 52 Installation Safety distances to the sides of the Ideally the hob should be installed with plenty of space on either side. There may be a wall at the rear and a tall unit or wall at one side. On the other side, however, no unit or divider should stan- d higher than the hob (see illustrations).
  • Page 53 Installation Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e. g. wood) a minimum safety distance of 50 mm must be maintained between the cut-out and the cladding.

  • Page 54: Hob With Frame Or Bevelled Edge

    Installation Hob with frame or bevelled edge Building-in dimensions for KM 530 / KM 544 / KM 545 (Hobs with frame) Spring clamps Building-in depth Front Mains connection box with mains connection cable, L = 1440 mm Wiring harness, L = 1550 mm...
  • Page 55 Installation Building-in dimensions for KM 537 / KM 551 (Hobs with frame) Spring clamps Building-in depth Building-in depth for mains connection box Front...
  • Page 56 Installation Building-in dimensions for KM 540 / KM 541 / KM 542 / KM 543 (Hobs with frame) Spring clamps Building-in depth Front Mains connection box with mains connection cable, L = 1440 mm Wiring harness, L = 1550 mm...
  • Page 57 Installation Building-in dimensions for KM 547 (Hob with frame) Spring clamps Building-in depth Front Mains connection box with mains connection cable, L = 1440 mm Wiring harness, L = 1550 mm...
  • Page 58 Installation Building-in dimensions for KM 548 (Hob with bevelled edge) Spring clamps Building-in depth Front Mains connection box with mains connection cable, L = 1440 mm Wiring harness, L = 1550 mm Safety bracket...
  • Page 59 Installation Building-in dimensions for KM 550 (Hob with frame) Spring clamps Building-in depth Building-in depth for mains connection box Front...
  • Page 60 Installation Building-in dimensions for KM 553 (Hob with bevelled edge) Spring clamps Building-in depth Building-in depth for mains connection box Front Safety bracket...
  • Page 61 Installation Preparing the worktop Hobs with frames: ^ Make the worktop cut-out following If, during installation, you find that the dimensions applicable. the seals on the corners of the frame Remember to maintain a minimum are not flush with the worktop, the safety distance of 50 mm from the corner radius ß...
  • Page 62 Installation Fixing the spring clamps and safety Worktops made of wood, Corian and brackets Askilan etc. ^ Position the spring clamps and the safety brackets (only supplied with bevelled edge hobs) in the positions shown in the illustrations (see "Building-in dimensions") by placing them on or flush with the upper edge of the cut-out as illustrated, and then secure them with the 3.5 x 25 mm...
  • Page 63 Installation Granite and marble worktops ^ Apply silicone ^ Position the spring clamps to the side edges and lower edge of the spring clamps. safety brackets (on hobs with bevelled edges only), and fix in place The screws are not required for granite using double-sided tape or marble worktops.
  • Page 64 Installation Installing the hob Worktops made of Wood, Corian and Askilan etc. ^ Feed the hob connection cable down through the cut-out. ^ Lightly position the hob on the spring clamps ^ Using both hands, press down evenly on the sides of the hob until it clicks into position.

  • Page 65: Mains Connection Box

    Installation Mains connection box The connection box can be positioned as follows: – placed in base unit underneath the – on the side wall of a base unit underneath the hob – on the wall behind a base unit – in a neighbouring unit. A minimum safety distance of 150 mm must be maintained between the connection box and the...

  • Page 66: Sealant

    Installation Sealant Tiled worktop Grout lines and the hatched area Do not use any sealant unless underneath the hob frame must be expressly instructed to do so. The smooth and even. If they are not the sealing strip under the edge of the top hob will not sit flush with the worktop part of the hob provides a sufficient and the sealing strip underneath the...

  • Page 67: Flush-Fitted Hobs

    Installation Flush-fitted hobs Building-in dimensions for KM 552 N.B. Cut-out dimensions 470 are for the step required in granite and marble worktops only It is essential to follow the detailed drawings on the next pages too.
  • Page 68 Installation The hob can be installed Building-in depth – directly into a suitable cut-out in a granite or marble worktop. Building-in depth for mains connection box – in a suitable cut-out in a tiled or solid wood worktop with a wooden support Front frame.
  • Page 69 Installation ^ Make the worktop cut-out as shown Making the worktop cut-out and in the drawings. building in the hob ^ Feed the hob connection cable down Granite and marble worktops through the cut-out. ^ Centre the hob in the cut-out. ^ Connect the hob to the mains.
  • Page 70 Installation ^ Make the worktop cut-out as shown Solid wood and tiled worktops in drawings. ^ Fix the wooden frame 7mm below the top edge of the worktop (see diagram). ^ Feed the hob connection cable down through the cut-out. ^ Centre the hob in the cut-out.

  • Page 71: Electrical Connection

    (including switch, type H 05 W-F or H 05 RR-F, fuses and relays). available from the Miele Customer Contact Centre. Important U.K. The appliance is supplied for Ensure power is not supplied to the...
  • Page 72 Installation WARNING THIS APPLIANCE MUST BE EARTHED The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system, which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and regularly tested and where there is any doubt, the electrical wiring...

  • Page 73: Wiring Diagram

    Installation Wiring diagram N.B. This appliance is supplied single phase only in the U.K. / AUS / NZ...
  • Page 76 Alteration rights reserved / 3709 M.-Nr. 06 069 910 / 07...

Table of Contents