Safety Switch-Off - Miele KM 6565 FR Operating And Installation Instructions

Safety features

Safety switch-off

Safety switch-off if the sensor
controls are covered
Your hob will switch off automatically if
one or several of the sensor controls
remain covered for longer than
10 seconds, for example, by finger
contact, food boiling over or by an
object.  will appear in the timer display
for a few seconds. If the  sensor
control is affected,  will light up until
the object or soiling has been removed.
 will switch off once you have removed
the object or cleaned the hob and the
hob will be ready to use again.
Excessive operating time
The safety switch-off mechanism is
triggered automatically if a cooking
zone is heated for an unusually long
period of time. This time depends on
the power level selected. If it has been
exceeded, the cooking zone switches
off and the residual heat indicator
appears. If you switch the cooking zone
on and off again, it is ready for
operation again.
The hob is programmed to safety
setting 0 at the factory. If required you
can set a higher safety setting with a
shorter maximum operating time (see
chart).
42
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the
number are only available if the power level
range has been extended (see "Setting
ranges").
** Factory default setting
Maximum operating time
[h:min]
Safety setting
0** 1
10:00 8:00
10:00 7:00
5:00 4:00
5:00 3:30
4:00 2:00
4:00 1:30
4:00 1:00
4:00 0:42
4:00 0:30
4:00 0:30
1:00 0:24
2
5:00
4:00
3:00
2:00
1:30
1:00
0:30
0:24
0:20
0:18
0:10