Safety Switch-Off - Miele KMDA 7473 FR-A Operating And Installation Instructions

Table of Contents

Advertisement

Safety features

Safety switch-off

Sensor controls are covered
Your hob will turn off automatically if
one or several of the sensors remain
covered for longer than 10 seconds, for
example, by finger contact, food boiling
over or by an object such as an oven
glove or tea towel.  will flash briefly in
the timer display and a tone will sound.
 will go out once you have removed
the object and/or cleaned the hob and
the hob will be ready to use again.
Excessive operating time
The safety switch-off mechanism is
triggered automatically if a cooking
zone is heated for an unusually long
period of time. This time depends on
the power level selected. If it has been
exceeded, the cooking zone switches
off and the residual heat indicator ap-
pears. If you switch the cooking zone
on and off again, it is ready for opera-
tion again.
The hob is programmed to safety set-
ting 0 at the factory. If required you
can set a higher safety setting with a
shorter maximum operating time (see
chart).
52
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the num-
ber are only available if the power level
range has been extended (see "Setting
ranges").
** Factory default setting
Maximum operating time
[h:min]
Safety setting
0**
1
10:00
8:00
5:00
10:00
7:00
4:00
5:00
4:00
3:00
5:00
3:30
2:00
4:00
2:00
1:30
4:00
1:30
1:00
4:00
1:00
0:30
4:00
0:42
0:24
4:00
0:30
0:20
4:00
0:30
0:18
1:00
0:24
0:10
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kmda 7473 fr-uKmda 7473 fl-aKmda 7473 fl-u

Table of Contents