Safety Switch-Off - Miele KM 7360 FR Operating And Installation Instructions

Table of Contents

Advertisement

Familiarisation

Safety switch-off

Sensor controls are covered
Your hob will switch off automatically if
one or several of the sensor controls re-
main covered for longer than
10 seconds, for example, by finger con-
tact, food boiling over or by an object.
 will appear in the timer display for a
few seconds. If the  sensor control is
affected,  will light up until the object
or soiling has been removed.
 will switch off once you have removed
the object or cleaned the hob and the
hob will be ready to use again.
Excessive operating time
The safety switch-off mechanism is
triggered automatically if a cooking
zone is heated for an unusually long
period of time. This time depends on
the power level selected. If it has been
exceeded, the cooking zone switches
off and the residual heat indicator ap-
pears. If you switch the cooking zone
off and on again, it is ready for opera-
tion again.
You can adjust the safety switch-off by
changing the safety setting (see "Ad-
justing settings").
34
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the num-
ber are only available if the power level
range has been extended (see "Setting
ranges").
** Factory default setting
Maximum operating time
[h:min]
Safety setting
0**
1
10:00
8:00
5:00
10:00
7:00
4:00
5:00
4:00
3:00
5:00
3:30
2:00
4:00
2:00
1:30
4:00
1:30
1:00
4:00
1:00
0:30
4:00
0:42
0:24
4:00
0:30
0:20
4:00
0:30
0:18
1:00
0:24
0:10
2

Advertisement

Table of Contents
loading

Table of Contents