Table of Contents
Advertisement
NUMBER PROBLEM
The product failure light (red light)
1
lights up and flashes.
The product stop working, and the
2
temperature is too high.
3
Product stop working
4
Product stop working (display code)
5
Drum sound when laying or winding
6
rope
7
After operating according to charging
8
requirements, the battery still can't
be charged.
9
10
Water damage
11
Remove protection
Product Maintenance
Both portable winch, accessories and rope must be carefully maintained to prevent damage and wear after use. If
the rope is damaged, it is recommended not to use it. Replace it as soon as possible. It is very dangerous to use
damaged rope. Before using, it is best to examine portable winch and battery parts carefully. Battery components
also need to be inspected or replaced regularly to make sure they are not damaged. If you have any other
questions, we welcome your inquiries at any time.
2121 Blount Road Pompano Beach, FL 33069
TROUBLE SHOOTING
MileMarker.com
SOLUTIONS
This indicates the load reaches more than 80% of the rated
load, which needs attention.
Stop using pulling tool until the motor cools to room
temperature.
Please check the battery power. If power low, please charge it.
Exceeds the rated load. Try to reduce the load.
The current is too big, resulting in damaged fuse brakes . The
fuse needs to be replaced or contact customer service.
The rope on the drum are wound together, you need pull
the rope out and rewind it.
Check the power socket problem. If so, replace the socket.
Check surrounding.
Check whether the charger and battery are faulty. If so,
please purchase a new one or contact the customer service.
Return to factory for repair.
Close the portable winch, unplug the battery, reload, and
restart the winch.
1.800.886.8647
PAGE 13
Advertisement
Table of Contents
