Winch Maintenance; Troubleshooting - Mile Marker SEC8 ES Installation And Operator's Manual

• All moving parts within the Electric Winch have been lubricated using high temperature lithium grease at the factory. No further internal
lubrication is required for the life of the winch.
•Lubricate the cable periodically using light penetrating oil.
• Electrical connections may corrode over a period of time due to environmental changes. This may result in reduced performance of the winch
or even possible electrical shorting. Hence, always clean the electrical connections before and after using the winch.
•After every use of the winch, inspect the cable for damages such as kinks, broken strands etc. When damaged, replace the cable immediately!
CAUTION: It is recommended that you replace the cable with superior Mile Marker cables. If replacing from other sources, carefully compare for the
maximum load capacity of the cable with that mentioned in the Specifications Section of this manual.

WINCH MAINTENANCE

TROUBLESHOOTING

Page 12