Table of Contents
Advertisement
Before using this winch to lift or pull a load, you should familiarize with your winch. It is important to know how it
works.
This winch is a portable tool for lifting and pulling. This powerful tool has a power switch, a directional switch and a
speed controller. The directional switch controls the forward and reverse rotation of the drum. The speed
controller can change the speed when winding in or out.
NOTE:
When spooling out or rewinding the rope, it is necessary to keep a tension on the rope to prevent bind
and entangle the rope, causing damage to it and the tool. Do not spool out any more when you see the
red paint on the rope. Always keep at least 5 wraps of rope around the drum. Avoid spooling the drum
in the wrong direction. Never spool the rope out past the red painted on the rope.
The following situations will cause the system to enter the protection
state automatically :
1. At 90% of the pulling capacity the overload indicator would read Code 1
2. The battery is overheating.
3. Low battery.
When this occurs, please follow these steps :
1. Turn off the power switch.
2. Remove the battery.
3. Overload: Release the loading or increase the distance of the anchor point or use a snatch block to
increase the pulling power.
Overheating: Allow the battery to cool to room temperature.
Low battery: Charge the battery.
4. Install the battery back into the product.
5. Turn on the power switch.
The portable winch is now ready to be operated again.
PAGE 10
OPERATION
Red paint
2121 Blount Road Pompano Beach, FL 33069
Stop spool out
MileMarker.com
1.800.886.8647
Advertisement
Table of Contents
