Dmx Addressing - SHOWTEC QubiQ S1000 User Manual

QubiQ S1000

DMX Addressing

In a setup with multiple devices, make sure that you set the DMX starting address of each device
correctly. The QubiQ S1000 has 1 personality: 1 channel.
If you want to connect multiple devices on one data link and use them in 1-channel mode, for example,
follow the steps below:
Set the starting address of the 1
02) Set the starting address of the 2
03) Set the starting address of the 3
04) Continue assigning the starting addresses of the remaining devices by adding each time 1 to the
previous number.
Make sure that you do not have any overlapping channels in order to control each QubiQ S1000
correctly. If two or more devices are addressed similarly, they will work similarly.
Product code: 61060
device on the data link to 1 (001).
st
device on the data link to 2 (002), as 1 + 1 = 2.
nd
device on the data link to 3 (003) as 2 + 1 = 3.
rd
20
Fig. 08