Table of Contents
Advertisement
QubiQ S1000
Put the fluid tank back in the device, as shown in Fig. 17.
Screw the lid back on the fluid tank, as shown in Fig. 18.
Put the lid back on the device, as shown in Fig. 19.
Close the service lid, as shown in Fig. 20.
Wait for the device to heat up. This will take a maximum of 3 minutes.
Notes:
●
Do not allow the fog liquid to become contaminated. Always replace the caps on the fog liquid
container and the fog machine liquid tank immediately after filling.
Product code: 61060
Fig. 17
Fig. 19
24
Fig. 18
Fig. 20
Advertisement
Table of Contents
