Table of Contents
Advertisement
QubiQ S1000
Continuous Output
In this menu you continuously keep fogging until the tank is empty.
Press the red PLUS / CONTI button or press the CONTROL WHEEL to immediately start fogging at the
preset volume. To change the volume, see 6.8.4.2. Output Vol on page 38 for more information.
If you want to stop continuously fogging, press the red PLUS / CONTI button or press the CONTROL
WHEEL again.
Notes:
●
You cannot constantly fog @100% until the tank is empty.
In order to constantly fog, you have to adjust the output volume to 40%. Only then will the device
keep fogging until the tank is completely empty.
Timer / Interval
In this menu you can set the fog timer and determine the interval.
Press the yellow MINUS / TIMER button or press the CONTROL WHEEL to start your timer program. To
change the interval time, see 6.8.4.3. Interval on page 38 for more information.
If you want to stop continuously fogging, press the yellow MINUS / TIMER button or press the CONTROL
WHEEL again.
Manual Output
In this menu you can manually start fogging.
Press the green ENTER / MANUAL button or press the CONTROL WHEEL to immediately start fogging at
the preset volume. To change the volume, see 6.8.4.2. Output Vol on page 38 for more information.
If you release the green ENTER / MANUAL button or release the CONTROL WHEEL the device will
immediately stop fogging.
Product code: 61060
39
Advertisement
Table of Contents
