Connecting And Checking Vision Sensor And Robot Controller - Omron FH Series Construction Manual
Vision sensor robot vision application
Hide thumbs
Also See for FH Series:
- User manual (582 pages) ,
- Hardware manual (254 pages) ,
- Operation manual (166 pages)
Table of Contents
Advertisement
5.3.
Connecting and Checking Vision Sensor and Robot Controller
Follow the procedures below to connect the Vision Sensor and the robot controller and
to check the connection status.
Verifying Ethernet Communication (FH Series Vision Sensor)
5.3.1.
Connect the Vision Sensor and
1
the robot controller with LAN
cables.
(Operation
Sensor)
Move the mouse cursor to
lower left of the window to
display [Start]. Select [Start］-
[All Programs] - [Accessories] -
2
[Command Prompt] to launch
[Command Prompt].
(Operation
Sensor)
Execute PING command to the
3
IP
address
controller.
(Operation
Sensor)
When 32-byte data could be
successfully sent/received four
times as shown in the figure on
4
the right, that means that the
communications
established and the wiring and
settings of Ethernet is correctly
done.
of
the
Vision
of
the
Vision
of
the
robot
of
the
Vision
have
been
33
Advertisement
Table of Contents
