Setting Communications For Robot Controller - Omron FH Series Construction Manual
Vision sensor robot vision application
Hide thumbs
Also See for FH Series:
- User manual (582 pages) ,
- Hardware manual (254 pages) ,
- Operation manual (166 pages)
Table of Contents
Advertisement
5.2.
Setting Communications for Robot controller
Please follow the procedures below to set the communications for the robot controller.
Press [MENU] on the teaching
pendant to display the right
figure (HOME1 window).
1
Select [Next>] - [Next>] -
[Maint] - [Info] and then refer
to the IP address for the robot
controller
INFORMATION window.
Connect the PC and the robot
2
controller with LAN cables.
With
[Network and Sharing Center] -
[Change adapter settings] from
the control panel of the PC and
open
the
network
the robot controller.
The dialog shown on the right
3
will
be
[Internet protocol version 4
(TCP/IPv4)
property.
on
the
SYSTEM
right-click,
select
property
for
adapter
connecting
displayed,
select
and
open
the
a
30
Advertisement
Table of Contents
