Table of Contents
Advertisement
Instructions for use DIAGNOcam Vision Full HD
9 Information concerning the electromagnetic compatibility according to EN IEC 60601-1-2 | 9.1 Electromagnetic
Transmissions
Measurements of emitted in-
terference
HF emissions according to CISPR
11
HF emissions according to CISPR
11
Emission of harmonics according
to EN 61000-3-2
Emission of voltage fluctuations/
flicker according to EN 61000-3-3
9 Information concerning the electromagnetic
compatibility according to EN IEC 60601-1-2
9.1 Electromagnetic Transmissions
The DIAGNOcam Vision Full HD is designed for use in an environment of the
kind specified below. The customer or the user of the DIAGNOcam Vision Full
HD should ensure that the device is used in an environment of the specified
type.
Conformance
Group 1
Class B
Class A
Conforms
Electromagnetic environment
-
Guidelines
The DIAGNOcam Vision Full HD
uses HF energy exclusively for its
internal functions. Therefore, the
HF emission of the device is very
low and interference with adja-
cent electronic devices is unlikely.
The DIAGNOcam Vision Full HD is
suitable for use in all equipment,
including devices in living areas,
and suitable for equipment,
which is directly connected to
supply mains that also supply
buildings used for residential pur-
poses.
The DIAGNOcam Vision Full HD is
suitable for use in all equipment,
including devices in living areas,
and suitable for equipment,
which is directly connected to
supply mains that also supply
buildings used for residential pur-
poses.
The DIAGNOcam Vision Full HD is
suitable for use in all equipment,
including devices in living areas,
and suitable for equipment,
which is directly connected to
supply mains that also supply
buildings used for residential pur-
poses.
46 / 52
Advertisement
Table of Contents
