System Components - KaVo DIAGNOcam Vision Full HD Instructions For Use Manual

Instructions for use DIAGNOcam Vision Full HD
3 Product description | 3.6 System components
Camera
1 2 3
Camera with tip attached
1 2 3
Tip
1
Fluorescence Cover
Sheaths
Foot control
Table holder

3.6 System components

① Window with 2 LEDs each for Intraoral Mode and Fluorescence
Mode
② Tip holder
③ Control panel
See also:
2 6 Operation, Page 26
① Tip
② Control panel
③ Camera
See also:
2 6 Operation, Page 26
① 2x light exit for Transillumination mode
See also:
2 6.3 Snap-in and detach the tip, Page 28
Fluorescence Cover is used in Fluorescence mode.
See also:
2 6.4.2 Fluorescence mode, Page 31
The sheaths are used for infection prevention.
The foot control can be used as an alternative to the trigger button
on the control panel of the camera.
Briefly touching the foot control ones triggers the capture of an im-
age and/or starts/stops a video.
If the foot control is touched for a longer period of time (approxim-
ately one second), the image/video is saved in the imaging software
(if supported).
See also:
2 8.1 Foot Control Vision Full HD, Page 42
The table holder is to be placed on the dentist element and can be
used to store the camera.
Once the camera is placed in the table holder, it shuts off automatic-
ally. Once the camera is taken out of the table holder, it switches on
automatically.
20 / 52