Table of Contents
Advertisement
Instructions for use DIAGNOcam Vision Full HD
6 Operation | 6.4 Recording images
ð
The tip is connected automatically to the camera while it is being plugged
on, and switches it into Transillumination mode.
Note
Do not damage the sheath when you attach the tip.
The recording window of the imaging software shows a live image.
▶ Select an image detail.
▶ The camera has a fixed focus in this mode.
▶ Press one of the two trigger buttons.
▶ The camera switches to Freeze mode and/or starts the video recording. The
still image/video is transferred to the imaging software.
▶ To return to Live mode and/or to stop the video recording, press the trigger
button again.
▶ Process and save the image/video in the imaging software.
34 / 52
Advertisement
Table of Contents
