KaVo DIAGNOcam Vision Full HD Instructions For Use Manual page 30

Instructions for use DIAGNOcam Vision Full HD
6 Operation | 6.4 Recording images
1
1 2
① LEDs
This mode can be used to record intraoral images.
Recording an image in Intraoral mode
The DIAGNOcam Vision Full HD can be used to record still images and videos.
The possible recording modes depend on the imaging software.
▶ Connect the camera to the computer.
▶ Start up the imaging software.
▶ Remove the camera from the camera holder.
▶ Apply the sheath first before use the camera.
See also:
2 6.2 Use a sheath, Page 26
The recording window of the imaging software shows a live image.
▶ Select Intraoral mode (still image or video) in the imaging software or with
the menu button.
▶ Select an image detail.
▶ The camera automatically focuses the selected image detail (permanent
autofocus).
▶ Press one of the two trigger buttons.
▶ The camera switches to Freeze mode and/or starts the video recording. The
still image/video is transferred to the imaging software.
▶ To return to Live mode and/or to stop the video recording, press the trigger
button again.
▶ Process and save the image/video in the imaging software.
② Lens system
30 / 52