KROHNE OPTIWAVE-M 7400 C Short Manual page 54

OPERATION
4
Menu Function
No.
C6.4.9 Format 3rd
Value
C6.5 2nd Meas. Page
C6.5.1 Function
C6.5.2 1st Value
Variable
C6.5.3 0% Range
C6.5.4 100% Range
C6.5.5 Format 1st
Value
C6.5.6 2nd Value
Variable
54
Function description
You can change the number of decimal places
that are shown for the second value on the
measurement page in Normal mode. For
example, if you set this menu item to "X.XX",
the value shown will be corrected to 2 decimal
places. If you set this menu item to
"Automatic", the device will adjust the number
of decimal places automatically.
Minimum access level to change the
setting: User
This menu item changes the configuration of
data shown on the display screen in Normal
mode. There are two measurement pages
available to show readings in Normal mode.
This setting is for the second page.
Minimum access level to change the
setting: User
This changes the measurement type of the first
value on the measurement page.
Minimum access level to change the
setting: User
This is the 0% value given to the bar graph
indicator in Normal mode. The range is related
to the measurement type set in C6.5.2 1st Value
Variable. This menu item is only available if you
set C6.5.1 Function to "One Value & Bar" or
"Two Values & Bar".
Minimum access level to change the
setting: User
This is the 100% value given to the bar graph
indicator in Normal mode. The range is related
to the measurement type set in C6.5.2 1st Value
Variable. This menu item is only available if you
set C6.5.1 Function to "One Value & Bar" or
"Two Values & Bar".
Minimum access level to change the
setting: User
You can change the number of decimal places
that are shown for the first value on the
measurement page in Normal mode. For
example, if you set this menu item to "X.XX",
the value shown will be corrected to 2 decimal
places. If you set this menu item to
"Automatic", the device will adjust the number
of decimal places automatically.
Minimum access level to change the
setting: User
This changes the measurement type of the
second value on the measurement page. This
menu item is only available if you set C6.5.1
Function to "Two Values", "Two Values & Bar"
or "Three Values".
Minimum access level to change the
setting: User
www.krohne.com
OPTIWAVE-M 7400 C
Selection list
X, X.X, X.XX, X.XXX,
X.XXXX, X.XXXXX,
X.XXXXXXX, Automatic
One Value, One Value &
Bar, Two Values, Two
Values & Bar, Three
Values
Level, Distance, Sensor
Value, Reflection
2
Refer to "Function
description".
Refer to "Function
description".
X, X.X, X.XX, X.XXX,
X.XXXX, X.XXXXX,
X.XXXXXXX, Automatic
Level, Distance, Sensor
Value, Reflection
2
02/2019 - MA OPTIWAVE-M 7400 C R01 en
Marine Default
Automatic
Three Values
Distance
Refer to
"Function
description".
Refer to
"Function
description".
X.XXX
Level