KROHNE OPTIWAVE-M 7400 C Short Manual page 53

OPTIWAVE-M 7400 C
Menu Function
No.
C6.4.3 0% Range
C6.4.4 100% Range
C6.4.5 Format 1st
Value
C6.4.6 2nd Value
Variable
C6.4.7 Format 2nd
Value
C6.4.8 3rd Value
Variable
02/2019 - MA OPTIWAVE-M 7400 C R01 en
Function description
This is the 0% value given to the bar graph
indicator in Normal mode. The range is related
to the measurement type set in C6.4.2 1st Value
Variable. This menu item is only available if you
set C6.4.1 Function to "One Value & Bar" or
"Two Values & Bar".
Minimum access level to change the
setting: User
This is the 100% value given to the bar graph
indicator in Normal mode. The range is related
to the measurement type set in C6.4.2 1st Value
Variable. This menu item is only available if you
set C6.4.1 Function to "One Value & Bar" or
"Two Values & Bar".
Minimum access level to change the
setting: User
You can change the number of decimal places
that are shown for the first value on the
measurement page in Normal mode. For
example, if you set this menu item to "X.XX",
the value shown will be corrected to 2 decimal
places. If you set this menu item to
"Automatic", the device will adjust the number
of decimal places automatically.
Minimum access level to change the
setting: User
This changes the measurement type of the
second value on the measurement page. This
menu item is only available if you set C6.4.1
Function to "Two Values", "Two Values & Bar"
or "Three Values".
Minimum access level to change the
setting: User
You can change the number of decimal places
that are shown for the second value on the
measurement page in Normal mode. For
example, if you set this menu item to "X.XX",
the value shown will be corrected to 2 decimal
places. If you set this menu item to
"Automatic", the device will adjust the number
of decimal places automatically.
Minimum access level to change the
setting: User
This changes the measurement type of the third
value on the measurement page. This menu
item is only available if you set C6.4.1 Function
to "Three Values".
Minimum access level to change the
setting: User
www.krohne.com
OPERATION
Selection list
Refer to "Function
description".
Refer to "Function
description".
X, X.X, X.XX, X.XXX,
X.XXXX, X.XXXXX,
X.XXXXXXX, Automatic
Level, Distance, Sensor
Value, Reflection
2
X, X.X, X.XX, X.XXX,
X.XXXX, X.XXXXX,
X.XXXXXXX, Automatic
Level, Distance, Sensor
Value, Reflection
2
4
Marine Default
Refer to
"Function
description".
Refer to
"Function
description".
X.XXX
Level
X.XXX
Reflection
53