Fig. 73: Data Logger Screen With Green Calibration Symbol; Fig. 74: A Terminated Manual Calibration Procedure - M&C GENTWO PMA1000 Instruction Manual

Fig. 73: Data logger screen with green calibration symbol

Calibration procedure are shown in the data logger M3/S1 screen. The green symbols in-
dicate successfully completed calibrations, and red symbols failed calibration procedures.
Termination of a manual calibration procedure
„

Fig. 74: A terminated manual calibration procedure

A manual calibration procedure can be terminated before the measured values are con-
firmed and saved. To terminate the procedure, please scroll to the '-------' line. The label on
the green button changes to 'Abort'. Tap on the 'Abort' button and the screen changes to
the M2/S1 section.
You can also exit the calibration menu by tapping on another menu item. All terminated
calibration processes are recorded in M2/S3. This section is shown in this manual on page
34 in Fig. 29.
64
PMA1000/PMA1000L | 1.00.00 www.mc-techgroup.com