Fig. 24: M2/S1 - Start Screen Of The Home Button; Fig. 25: M2/S2 - Detailed View Of The Measuring Parameters - M&C GENTWO PMA1000 Instruction Manual

Fig. 24: M2/S1 - Start screen of the home button

1
Home button M2
The second section shows a more detailed view of the measuring parameters. The info
button on the next screen is green, that indicates that the instrument is in standard
operation mode.

Fig. 25: M2/S2 - Detailed view of the measuring parameters

To get back to the start screen M2/S1, please swipe to the right or tap on the home
button.
The warm-up period of the PMA1000/PMA1000L takes about two minutes. During the
warm-up period the info button on the M2/S2 screen turns yellow, to show that the de-
vice is not ready for operation yet. Instead of the mA-measuring range, a line will appear
saying 'warmup'.
During warm-up the mA-measuring range and the operating parameters are not activat-
ed. The default value for the mA-output is set to zero mA.
PMA1000/PMA1000L | 1.00.00
2
Indicator light (status: green, yellow or red)
www.mc-techgroup.com
1
2
32