Fig. 46: Screen To Confirm The Update Of The Application Software; Fig. 47: M4/S2 Screen With 'Factory Reset' Selected - M&C GENTWO PMA1000 Instruction Manual

Fig. 46: Screen to confirm the update of the application software

Please insert a USB stick with the latest version of the software in the USB port located at
the rear side of the analyzer. Tap the 'Pls. confirm!' button to start the download of the
update.
This ends the measurement. After a software update, an update of
the database might be also necessary.
Please make sure that the user-defined parameter settings are saved
Note
and loaded via the csv-export or import functions.
It might be necessary to enter the user-defined parameter settings
again, if the user defined parameters are not properly saved.
5 = Factory reset
„

Fig. 47: M4/S2 screen with 'Factory reset' selected

47
PMA1000/PMA1000L | 1.00.00 www.mc-techgroup.com