M4/S1 - Measuring Range Selection And Parameter Settings; Fig. 32: Calibration Symbols To Highlight Calibration Procedures; Fig. 33: M4/S1 Edit Buttons For Measuring Range And Operating Parameter Settings - M&C GENTWO PMA1000 Instruction Manual

The measured data can be saved as a CSV-file on a USB stick. The CSV-file can be opened
in a spreadsheet application like MS Excel.
To export data please select month, day and hour of the required data recordings. Each file
can only store one hour of recorded data.
Please tap on the '*.csv exporting' button to export the selected data.
If you don't select the hour of the recorded data, the measurements
of the whole month or day will be displayed in the diagram.
Note
This amount of data is too large to save in one file. To prevent a larger
file size the '*.csv exporting' button will not be displayed if the data is
recorded for more than an hour.

Fig. 32: Calibration symbols to highlight calibration procedures

The calibration symbols are displayed in the upper half of the diagram in section M3/S1.
They indicate successfully completed and failed calibration processes. The red symbol
shows failed calibration processes and the green symbol indicates a successful
calibration.

7.3.11 M4/S1 - Measuring range selection and parameter settings

To set your measuring range and operating parameter limits, please tap on the settings
button M4 in the menu bar. For each setting an edit button appears on the screen.
1
2

Fig. 33: M4/S1 Edit buttons for measuring range and operating parameter settings

1
Edit button for measuring range selection
3
Edit button for alarm limit Lim1
5
Edit button for alarm limit Lim2
PMA1000/PMA1000L | 1.00.00
2
Edit button for parameter list
4
Settings button M4
www.mc-techgroup.com
3
4
5
36