Fig. 64: Warm-up phase in M2/S1 and warm-up info on M2/S2
The green indicator light on screen M1/S1 shows that the analyzer is ready to operate.
Fig. 65: Analyzer is ready to operate
When a settings screen is open, the display stays on this settings
screen. This means the analyzer is not in operating mode.
Note
All other screens jump back to the start menu M2/S1, if the touch-
screen has not been used for 3 Minutes. The analyzer is still in
operating mode.
59
PMA1000/PMA1000L | 1.00.00
www.mc-techgroup.com