Fig. 43: After Selecting '2 = System', The Screen With System Settings Opens - M&C GENTWO PMA1000 Instruction Manual

Fig. 43: After selecting '2 = System', the screen with system settings opens

A restart of the analyzer is necessary after changing the system
Note
settings.
Here is an overview of the system settings.
Parameter description
Language: 1 = D; 2 = GB; 3 = I; 4 = F; 5 = ES;, ..., 132=USA
AutoCal option: 0 = no; 1=yes (with I/O5)
1 = zero gas, 2 = span gas, 3 = zero + span gas
AutoCal: Start at hour 1 to 23 (0 = inactive)
AutoCal: Interval in n hours (1, 24, 168, 336...)
AutoCal: Test Mode (0=inactive, 1=active)
AutoCal: Dwell time [s] HSS2 Zero gas
AutoCal: Dwell time [s] HSS3 Span gas
AutoCal: Dwell time [s] RS1 AutoCal end
System time [s] until back to the main menu display
Screensaver Brightness: 20 ... 100%
Option pressure compensation: (not in use)
Option flow error ignore: 0=no, 1=active
ZRO2 Faktor T [Kelvin]
3 = not available
„
This feature is not available.
45
PMA1000/PMA1000L | 1.00.00
Default value
132
0
1
0
24
0
60
60
60
120
35
1
0
885
www.mc-techgroup.com