Introduction; Application; Figure 1 Flow Sheet - M&C PSS Series Instruction Manual

6

INTRODUCTION

The portable gas conditioning and sampling system PSS-10/1 has been especially designed so that precise gas
analyses can be carried out in any place and at any time.
The entire gas conditioning system is housed in a compact and robust aluminium framed case which ensures
that the components can be removed easily, and gas analysis carried out quickly, safely and with a minimum
amount of maintenance.
7

APPLICATION

The gas conditioning and sampling system is ideally suited for both intermittent and continuous operation.
The components of the system PSS-10/1 are intended for "standard use." We also provide a wide range of
additional equipment and other components should special measurements be required.
Sample gas
IN
 
Figure 1 Flow sheet
 Sample gas probe, material stainless steel 316, diameter 4/6 mm, length 0.5 m
 Sample gas line, PVC hose DN 4/6 mm, length 3 m
 Gas cooler ECP20/2
 Fine filter FP-2T, filter element fineness 2 μm
 Sample gas diaphragm pump N9KPE
 Flowmeter FM40, option
 Pre-filter PF 2
 Peristaltic pump SR25.1 for continual removal of condensate
8
ECP 20-2
+5 °C [41 °F]



PSS-10 | 1.00.02

Condensate OUT
www.mc-techgroup.com

