4.2.3.4. Set Output Color on Signal Loss
This menu allows the user to set the output color when the signal is loss.
1. Grey
(outputs grey when no input signal is detected)
2. Black (outputs Black when no input signal is detected)
3. Green (outputs Green when no input signal is detected)
4.2.3.5. Enable Deinterlacing
This menu allows the user to turn the deinterlacer on or off on a per channel basis. When deinterlacer is
on the 2431RX-2 will output a progressive signal, when deinterlacer is off the 2431RX-2 will output an
interlaced signal.
1. Enable (will be prompted for input 1 or 2)
2. Disable (will be prompted for input 1 or 2)
CONFIGURATION
Figure 4-8: Set Output Color on Signal Loss
Figure 4-9: Enable Deinterlacing
Revision 1.0
Dual Path Serial Digital to DVI Converter
2431RX-2
Page - 15