Changing Oil In The Front Axle Hubs - Valtra HiTech T3 Series Operator's Manual

4. Maintenance
1
2
GUID-874BE334-3980-4131-A119-15C6FF648AA0
1. Drain plug
2. Inspection hole
1. Unscrew the drain plug.
2. Drain the oil into a suitable container.
3. Clean the plug and refit it.
4. Fill new oil through the inspection hole up to the level of the hole.
4.7.5.3

Changing oil in the front axle hubs

Change oil in the front axle hubs periodically.
1
GUID-7598191B-540A-4E2E-8FA1-93BD16C2B4B9
1. Inspection hole
1. Turn the wheel until the inspection hole is pointing downwards.
2. Unscrew the plug and drain the oil into a suitable container.
3. Turn the wheel until the line of the inspection hole is horizontal.
4. Fill up with oil to the level of the hole.
- 280 -