Autocomfort Cab Suspension - Valtra HiTech T3 Series Operator's Manual

3. Operation
GUID-5316E8BD-67AE-47A8-90BE-7555895DD00C
1. Lock holes
2. Lock pins
3. Ring pins
4. Locking wheel
1. To disengage the air suspension, secure the lock pins in the lock holes.
2. Make sure that the ring pins of the lock pins are in place.
3. If the lock holes do not line up when installing the lock pins, loosen the
locking wheel and adjust the suspension height a little to line up the holes.
NOTE: After the adjustment, lock the wheel into the middle point. This
ensures that there is enough suspension travel in both directions when the
suspension is operating.
3.8.19

AutoComfort cab suspension

AutoComfort cab suspension is a semi-active system that controls the cab
suspension either automatically or manually.
The AutoComfort cab suspension system is extra equipment.
It is recommended to keep the front axle suspension (extra equipment) on
especially when driving on a road.
The automatic mode of the AutoComfort system adjusts the damping
automatically based on:
• Unevenness of the driving surface
• Driving speed
• Change of the Powershift gear
1
3
2
3
- 116 -
1
2
4