Table of Contents
Advertisement
•
To cancel the preprogramming:
The engine must be running when you cancel the preprogramming.
•
Start the engine.
•
Press down the clutch and brake pedals to ensure safety.
You can cancel the preprogramming also while driving.
•
Select the driving direction F or R with the power shuttle lever.
•
Press the Powershift preprogramming push button for at least two seconds.
You can cancel the programming of the other driving direction in the same
way.
3.8.11.6
Using the shifting automatics
The tractor has two automatic gear changing programs (MODE 1 and MODE 2).
•
With the MODE 1 program, the gears are changed according to the load and
the engine speed.
•
With the MODE 2 program, you can program the engine speeds where the
gears are changed.
For example, if the driving speed is 32 km/h (D range) and MODE 1 or MODE 2
is selected, the automatics shift the gear to C1 when the driving speed decreases
to 0 km/h.
1
GUID-AA11DB5A-6F3A-49FF-B16A-BED9DE4382B7
1. Shifting automatics switch
2. Indication of the selected program
The manual mode is on when the shifting program indicator is not visible.
•
Press the symbol side of the shifting automatics switch to cycle through the
programs.
Before you can cycle through the programs, you must first activate the switch
by pressing it once.
The programs change in the following order: manual mode, MODE 1, MODE
2.
2
- 103 -
3. Operation
Advertisement
Table of Contents
